Plug-in solar law passed
New Hampshire balcony solar law
Published by ChoiscoLast verified
Quick answer
Yes, starting January 1, 2027. New Hampshire's SB 540 (Chapter 262) lets each metered customer use one plug-in solar system of up to 1,200 watts with no utility approval, no interconnection paperwork and no fees; your utility may ask you to tell it the system's size after you install. The system must be certified by a nationally recognized testing lab. Until then, the normal utility rules apply.
The rules, line by line
Each line shows what we checked and where. Labels explained in our methodology.
- Law
- SB 540 (2026), Chapter 262Verified
- Signed
- July 2, 2026Verified
- In effect
- January 1, 2027Verified
The building-code section starts later, once the state energy commissioner certifies that a national safety standard for connecting plug-in systems to a building exists.
- Maximum size
- 1,200 W AC inverter output, one system per metered customerVerified
- Utility approval or notice
- No approval, interconnection review or extra utility equipment. The utility may set up a way for you to report the system's wattage after you install, for notice only.Verified
- Fees
- None, apart from normal charges for the power you useVerified
- Required certification
- Certified by a nationally recognized testing laboratory to national safety standards for distributed energy and plug-in solar. UL 3700 is not named.Verified
- Outlet and wiring
- A receptacle or other non-permanent wiring connection. The law does not name a voltage.Verified
- Renters and landlords
- Nothing in the law. A lease can still restrict what you attach to a balcony.Verified
- HOAs
- Nothing in the law. HOA or condo rules may still restrict installation.Verified
- Pay for power sent to the grid
- None. The system must be intended only to offset your own use.Verified
All facts above last checked Oct. 20, 2026.
Products that mention New Hampshire
- Bright Saver Balcony Solar Kit: Ships only to Utah, Virginia, Colorado, Maryland, Connecticut, New Hampshire and New Jersey. Says it cannot ship to California, Maine or Vermont yet, pending whole-system UL 3700 certification.
These are the makers' own statements; check each product against the requirements above. See the kit tracker.
What a balcony kit could make in New Hampshire
Estimates for 800 W of panels facing south under open sky, from the same data as our calculator.
- Hung vertically on a railing
- about 780 kWh a year
- On a stand tilted about 30°
- about 1,090 kWh a year
- Average home electricity price
- 26.8¢ per kWh, January to July 2026 (year to date)
- Worth, if your home uses all of it
- about $210 to $290 a year
Most homes use only part of the power at the moment it is made, so real savings are usually lower. The calculator works that out hour by hour for your own setup.
Sources: PVGIS 5.3, European Commission Joint Research Centre; U.S. EIA, Electric Power Monthly, Table 5.6.B
Open questions we are tracking
- How each utility will ask you to report the system's wattage.
- The state building code rules for plug-in systems wait on a national safety standard.
- The state must post consumer guidance, including a warning that unlisted or improperly connected systems may affect home or renters insurance.
- No renter or HOA protections.
Sources
- Source: New Hampshire SB 540, chaptered text (Chapter 262) (primary)
Timeline
- July 2, 2026
Governor signed SB 540 (Chapter 262).
Get New Hampshire updates
One email when the rules change or a qualifying kit becomes available in New Hampshire.
This page explains the law in plain English. Your utility, local codes, lease or HOA may add requirements. Estimate your savings with the calculator.